FORD WINDSOR LOW MOUNT BUNDLE BLACK
Included in the Windsor bundle is
- Serpentine pulley kit (diamond or pro series) - the only difference is the design
- Low mount alternator bracket
- Serpentine belt
- Billet throttle cable bracket
- Timing pointer
- High Voltage Coil Bracket (optional)
Low Mount Alternator Bracket
Designed by an engine builder, the key elements that set this low mount bracket apart are:
- Made from strong 6061 Aerospace alloy.
- Extremely strong. There are 3 strong points of contact for mounting the bracket to the engine block. Also, the solid lower arm design means this bracket doesn’t twist under high loads or under sharp hard engine acceleration.
- Suitable when using electric water pump. It reduces the overall length of the belt required creating a nice short strong setup.
- Great for servicing engines at the track. As the alternator is down low, parts can be removed from the engine without needing to remove and refit the alternator - one less hassle.
- Perfect fitment right out of the box - designed to directly replace factory alternator brackets and run the same backspacing so no need for extensive modifications if you are replacing your standard style alternator bracket.
- Timing pointer included.
This listing is for black anodised (satin)
NOTES
- Check product pictures for alternator spec. This bracket will work with Powermaster & Aeroflow alternators along with many other brands.
- Works on standard blocks with standard 5/16 bolt hole sizes. If your timing cover bolt sizes vary from 5/16 (such as for iron eagle blocks) then you will need to bring them back to oem spec by using thread inserts.
- Designed to replace factory alternator bracket and will require raised face harmonic balancer as seen on factory engines. If you have an aftermarket flat face balancer you will need to measure the balancer and purchase a raised hub for the balancer essentially bringing your aftermarket balancer back to factory measurement spec.
These brackets have been tested with aeroflow 140 amp ford alternators (Delco body) AF4273-1140
High Voltage Coil Bracket (optional)
- One for all coil bracket that will hold all the major brands including ICE Ignition, MSD Ignition, and Aeroflow.
- Crafted from robust 6061 aerospace aluminum.
- Stainless steel hardware included.
- Check 'Tech Specs' for compatibility.
All Unrivaled billet parts are considered aftermarket and suitable for racing/off road purpose, these are not OEM replacements fitment & vehicle safety is responsibility of vehicle owner. Unrivaled ensure that these parts are to the highest standards and fit the specified engines correctly. Vehicle fitment is responsibility of vehicle owner and pre purchase checking is advised before purchase of any billet aftermarket parts. There is no return on billet parts for change of mind or vehicle fitment issues.
FORD WINDSOR LOW MOUNT BUNDLE BLACK
High voltage coil bracket is compatible with the following ignition coils:
- ICE IGNITION 4100 & 4200 series
- MSD SS BLASTER RED & BLACK Part #8207 or #82073: Universal - Any MSD 6-Series Ignition
- MSD HVC 2 BLUE Part #8253: Universal - Add To Any MSD 6-Series Ignition
- MSD HVC 2 RED Part #8261: Use with MSD 7 or 8 Series Ignition Control
- MSD HVC 2 BLACK Part #82613: Use with MSD 7/8/10 Series Ignition Control
- MSD HVC 3 RED Part #82612: Use with MSD Power Grid 600 Single Channel - PN 8001
- MSD HVC 3 BLACK Part #826123: Use with MSD Power Grid 600 Single Channel - PN 8001
- AEROFLOW XPRO Universal SS Ignition Coil Part Number AF4020-8207